Our rating:
The cheapest model of the scooter family Xiaomi, the younger brother of 1S, with a maximum speed of 25 km/h and a range of 20 km makes it perfect for short distances.
The declared nominal power of 250W gives it discreet agility in daily use, suitable for short distances.
The declared autonomy of 20km may vary depending on the type of route, the weight of the person and the speed.
From the site Xiaomi:
"Distance traveled of 20 km on a single charge measured with the following conditions: load of 75kg, temperature 25°C, flat road without strong wind, energy saving mode and a constant speed of 15km/h. This may vary with different loads, temperatures, wind speeds, driving styles and other factors.”
Below is a list that might be useful to you:
Specifications
source https://www.mi.com/it/mi-electric-scooter/
| Dimensions (Open) | Approx. 108 x 43 x 114 cm |
| Dimensions (Folded) | About 490mm*1080mm*430mm |
| Model | Essential |
| Weight : | About 12 kg |
| Material | Aerospace aluminum |
| Wheel dimensions | 8.5 Inches |
| Candle Dyes | Black |
| Max speed | 25 km/h, 18 km/h in Cruise Control mode |
| Maximum torque | 16 N·m |
| Nominal power | 250 W |
| Maximum power | 500 W |
| Maximum practicable gradient | About 10% |
| Walkable terrain | Concrete, asphalt, flat ground, bumps and steps less than 1cm high and less than 3cm wide |
| IP grade | IP54 against dirt, dust and splashes |
| Battery | 36V / 5.100mAh 183Wh |
| Autonomy [1] | 20 km |
| Charging time | About 3 hours |
| Battery management | Short circuit protection, overcurrent protection, double overcharge protection, double overdischarge protection, thermal resistance, undervoltage protection with self-lock. |
| Braking distance [2] | 4 meters on flat, dry asphalt |
| Braking method | recovery + disc brake |
| Tire material | inflatable rubber tire |
| Front lighting | 2W ultra bright, 6 meters range |
| Rear light | LED light |
| Display | Display with speed indicator and driving mode selector (pedestrian mode: 5 km/h; D: 20km/h; S: 25 km/h) |
| Recommended age | 16 50-years |
| Recommended height | 120-200cm |
| Maximum load | 100kg |
| Package Contents | Electric Scooter, adapter, Allen key, tire inflator nozzle, 4 Allen screws (handlebar installation) |
| NOTES | [1]. Distance traveled of 20 km on a single charge measured with the following conditions: load of 75kg, temperature 25°C, flat road without strong wind, energy saving mode and a constant speed of 15km/h. The data may vary with different loads, temperatures, wind speeds, driving styles and other factors. [2]. Braking distance of 4 meters measured from a speed of 20 km/h, temperature of 20°C, load 75kg, tire pressure 35 PSI on flat, dry asphalt. |
Images
Manual
Fault error codes
In case of problems, the scooter warns the user by acoustically signaling errors.
They are identifiable through:
- Official app We Home
- Acoustic signals (beeps) emitted when the vehicle is turned on.
To understand which error we are dealing with, it is essential to know that the long beeps correspond to the following list, to the first numerical value. The short beeps correspond to the second numerical value.
For example:
one long and four short beeps indicates error 14
Here you will find the list of numerical codes associated with the error
- 1 0 – Anomalous data communication between the control unit and the dashboard
- 1 1 – Fault on phase “A” controller/motor
- 1 2 – Fault on controller/motor phase “B”.
- 1 3 – Fault on controller/motor phase “C”.
- 1 4 – Accelerator not working properly
- 1 5 – Brake lever sensor not working properly
- 1 8 – Internal engine sensor error
- 2 1 – Communication error with the battery BMS
- 2 2 – Incorrect battery BMS password
- 2 3 – Abnormal battery BMS serial number
- 2 4 – Abnormal system voltage
- 2 6 – Flash memory problem – generic
- 2 7 – Incorrect controller password
- 2 8 – Some states of the power MOSFETs are abnormal
- 2 9 – The low state of the MOSFETs is abnormal
- 3 1 – Program jump error
- 3 5 – The scooter's serial number is incorrect
- 3 9 – The battery sensor temperature is abnormal
- 4 0 – The temperature of the control unit sensor is abnormal
Troubleshooting and spare parts
ATTENTION:
If you are not an expert or do not feel confident in carrying out repair operations on your electric scooter, DO NOT proceed with reading but rely on those like us who carry out these technical interventions.
The following list is related to quick error resolution and more oriented towards a non-professional audience.
| Error 10 – Change the dashboard or check the connections |
| Error 11, 12, 13, 18 – Replace the motor or attempt a reset via the official App |
| Error 14 – Replace the accelerator |
| Error 15 – Replace the brake lever |
| Error 21, 22, 23, 24, 39 – Replace battery BMS or completely replace battery pack |
| Error 26, 27, 28, 29, 31, 40 – Replace the control unit |
For all other spare parts we invite you to visit ours store on line in the section Parts Xiaomi
Accessories
The recommended accessories for this vehicle are:
For all the accessories for this vehicle we invite you to visit ours store on line in the section Accessories Xiaomi
Modification
For any type of support do not hesitate to contact us.